How to remove membrane keyboard keys? The membrane keyboard is the best choice for you if you are looking for a quiet typing experience and don’t want to get used to pressing a normal mechanical keyboard. Below, i will tell you about how to remove membrane keyboard keys. In this blog, we also have an article about mechanical vs membrane keyboard comparison that you might want to read about it.
A membrane keyboard is a computer keyboard whose “keys” are not separate, moving parts, as with the majority of other keyboards, but rather are pressure pads that have only outlines and symbols printed on a flat, flexible surface.”
What is keyboard?
A keyboard is a device that allows you to input text. It is one of the most important devices used in computer systems. It consists of a set of keys, which are used to input text and perform other functions. A keyboard is also called as keypad or keyboard pad.
What is membrane keyboard
The membrane keyboard is basically a rubber dome switch board where each key has a separate piece of rubber which moves when pressed. This movement activates electrical contacts underneath the keys. These contacts connect directly to your motherboard through an interface connector in between the two boards.
Membrane keyboards have been used since the early days of computing; however they weren’t very popular because of their high cost and low reliability. However, over the years, manufacturers started manufacturing them more reliably and in large volumes. Today almost every laptop comes with a membrane keyboard. Membrane keyboards have become so common that it’s hard to find a desktop computer without one now.
Most office keyboards and integrated laptop keyboards use membrane systems for their value and reliability. Membrane keyboards also have better resistance to liquid and dirt than their mechanical counterparts.”
Saeed Wazir, author from Dotaesports.com
Benefits of membrane keyboard:
- Low noise – Most people consider this to be one of the main advantages of membrane keyboards. Because there is no mechanism involved in moving up and down, the sound produced by the keys is much lower than that of traditional keyboards. So using a membrane keyboard will result in reduced background noise during work hours.
- Not easy to break – Since there is no mechanism involved, the chances of failure are less. Membranes tend to last longer and provide better performance than conventional keyboards.
- Cost-effective – One of the biggest disadvantages of membrane keyboards is its higher initial cost. But we can see that as time passes on, the price difference between membrane and conventional keyboards becomes minimal and even non-existent. And even after that period, you wouldn’t need to pay any maintenance fees.
- Safer – Unlike the traditional keyboard buttons, membrane keyboards don’t wear out easily. Plus, because there isn’t a mechanism involved, there are fewer possibilities of getting jammed while typing. As a result, users are safer from injury caused due to accidently hitting wrong keys.
- Good for gamers – With some models, membranes give you the option to adjust the sensitivity level according to your needs.
How To Remove Membrane Keyboard Keys
Take a photograph
Removing the keys is rather straightforward. The first step is an intriguing one: photograph your keyboard. Once the keys have been deleted, reinstalling them is time consuming. Not difficult. Simply tiresome. The whole process gets simpler if you have a snapshot to refer to while you replace the keys. After you’ve captured your image, it’s time to go to work.
Preparations
To begin, disconnect your keyboard and move it to a big flat surface, such as the kitchen table. It’s preferable to perform this in a location where you won’t lose any keys or screws. Prepare three bowls: one for the main Phillips head screws (cross-shaped), another for the supplementary bits such as clips, and another for the keys themselves.
Take out the screws
Second, flip the keyboard over and remove all of the screws. They are almost certainly Phillips head screws, therefore use the proper screwdriver.
Disconnect the two halves
Once all screws are removed, your keyboard should disassemble. You are now left with two halves. The upper portion, which contains all of the keys. Additionally, the bottom part contains all of the pressure plates. Half of the pressure plate should be set aside. You should avoid touching it at all costs to avoid injuring the delicate electronics.
Pull out the keycaps
Following that, you’ll use the slotted screwdriver to unscrew the keycaps. They should be secured to the key with two little clips on each side. You shouldn’t have to exert too much pressure; they should pop out rather effortlessly. It is preferable to avoid removing the enter/return key, since it may be a real hassle to reinstall. However, it should seem the same.
Was this helpful?
I’m Roselyn T., a self-proclaimed tech geek on a mission to unravel the wonders of the digital realm. As a dedicated reviewer of computers and laptops, I share my insights and expertise on the latest tech trends and innovations on my blog, workrift.com. With a passion for demystifying the tech landscape, I not only offer in-depth reviews but also provide practical tips to navigate the ever-evolving world of technology. I’m also an author of the book “AP Computer Science A Premium, 2024: 6 Practice Tests + Comprehensive Review + Online Practice (Barron’s AP)” which is sold on Amazon. Join me as we explore the exciting intersection of form and function in the realm of gadgets and gear.