How to fix mechanical keyboard switch that’s sticky? Mechanical keyboards are a rapidly growing segment of the PC market. They offer a variety of benefits, but they can also be quite tricky to operate. We’re here to help you learn how to take care of your mechanical keyboard switches, so you don’t damage them or wear them out before their time. In this blog, we also have an article about zop 104 keys mechanical keyboard that you might want to read about it.
Mechanical keyboards are the keyboards that most people picture when they think about keyboards; they’re the classic-looking, sturdy keyboards from the 1980s. A more proper definition is that mechanical keyboards are made with high-quality plastic key switches underneath each of the keycaps.”
Jolene Dobbin, author from HP.com
Mechanical Keyboard
Mechanical keyboards are the most popular keyboard types and come in many variations. Mechanical keyboards are usually mechanical, or have mechanical switches that make them different from regular membrane keyboards. Mechanical keyboards have a feel of tactile feedback, and are considered to be more accurate than membrane keyboards. There are also some mechanical keyboards that do not use mechanical switches, but instead use rubber dome switches, which also feel tactile.
A mechanical keyboard is built with high quality, typically spring activated key switches. These key switches vary based on the keyboard’s application or user preference.”
How To Fix Mechanical Keyboard Switch That’s Sticky?
So, how to fix mechanical keyboard switch that’s sticky? Depending on the amount of the keyboard’s stickiness, you may address a sticky key on a mechanical keyboard or even on any other sort of keyboard in a variety of ways.
Shake the Keyboard
Unplug the keyboard and aggressively shake it off. Assure that you have flipped the keyboard over and shaken it off gently to avoid damaging it.
It might be prudent to shake it while holding it at an angle to the floor. Shake it vigorously enough that crumbs and debris fall to the ground. You may even use a brush to remove any remaining crumbs. Brush away any garbage that has accumulated on the keyboard.
Blow Out the Switch Using Canned Air
One of the most common causes of sticky keys on a mechanical keyboard is dust or dirt on the switch itself. As a result, the slider or spring mechanism may get stuck. Though it is uncommon, the mechanical switch’s up and down action may allow food particles or other components to enter the switch.
Compressed or bottled air is a fantastic alternative for removing any muck that has accumulated around the activator on the keyboard. If this does not resolve the problem, you may be compelled to completely dismantle the keyboard and clean it of debris.
Remove Keycaps and Clean the Switch’s Debris
If the preceding procedure does not work, you will need to use more sophisticated techniques. This entails disconnecting the switch or completely removing it. Of course, this may not be the best course of action if you lack the necessary equipment. This is a more complex method of resolving sticky keys on a mechanical keyboard.
Remove the faulty keycaps and then arrange the keyboard vertically. Assure that the keyboard is parallel to the ground and perpendicular to the canned air. Halfway through, push the key switch and use pressurized air to remove any dirt from the keyboard or switch.
You should hold the can upright and straight to prevent the liquid from leaking out and causing additional harm to the keyboard mechanism. Blast the canned air for a few seconds while maintaining a modest pressure on the key switch. The muck within the switch should instantly rise to the surface. If it does not immediately come out, it may be prudent to refrain from blowing additional air.
Remove the Switch
You may use this strategy only if you possess the requisite expertise and instruments for completing the assignment. If you lack the necessary instruments or skills, this will prove to be one of the most difficult undertakings.
Your keyboard’s switch is housed in a plastic box and includes a spring, a slider, and an electric switch. On some keyboards, the switches are located on the PCB, whereas on others, they are mounted on a plate. It might be quite tough to remove and clean them. This may be time-consuming, complex, and incredibly inconvenient. You risk damage the switch or perhaps the keyboard in the process.
Was this helpful?
I’m Roselyn T., a self-proclaimed tech geek on a mission to unravel the wonders of the digital realm. As a dedicated reviewer of computers and laptops, I share my insights and expertise on the latest tech trends and innovations on my blog, workrift.com. With a passion for demystifying the tech landscape, I not only offer in-depth reviews but also provide practical tips to navigate the ever-evolving world of technology. I’m also an author of the book “AP Computer Science A Premium, 2024: 6 Practice Tests + Comprehensive Review + Online Practice (Barron’s AP)” which is sold on Amazon. Join me as we explore the exciting intersection of form and function in the realm of gadgets and gear.